Logo of the Federal Ministry for Economic Affairs and Energy
Made in Germany logo
Manufacturing Indonesia 2026German Exhibitors CS INSTRUMENTS GmbH & Co. KG

CS INSTRUMENTS GmbH & Co. KG

Booth number: 3418
www.cs-instruments.com

About us

The name CS INSTRUMENTS stands for proven and innovative measurement technology for compressed air and gases with subsidiaries and distributors all over the world.

CS INSTRUMENTS a German based company, continuously invests into the further training of its staff members and in modern calibration stands for dew point/pressure dew point and flow measurement. This continuous investment is the basis for the research, development and the subsequent realization of new product ideas in Germany.

All products without any exception are developed, produced and calibrated in Germany. We also take care that the slogan “Made in Germany" is not only a sentence on a paper but is also put into practice. Furthermore we always try to make sure that also our suppliers – if possible – are German based.

For these reasons we can rightly claim that CS Instruments for years belongs to the worldwide leading manufacturers of measurement technology for compressed air and gases.

Address

CS INSTRUMENTS GmbH & Co. KG
Zindelsteiner Str. 15
78052 Villingen-Schwenningen
Germany

E-mail: info@cs-instruments.com
Phone:  +49 7705 978990
Internet: www.cs-instruments.com

Contact person:

Mr. Gatot Rufiyanto
Country manager
E-mail: g.rufiyanto@cs-instruments.comm
Phone: +62 812 1888-5324

Products & Services

Measuring instruments for: Dew point - Flow meter - Leak detection - Pressure sensors - Compressed air Quality - Chart recorder - Humidity...

VA 500

VA 500 - Flow meter for compressed air and gases

Recording and reducing energy costs and CO2 emissions while increasing the sustainability of any compressed air system. With our VA500 it is possible to monitor your consumption and analyze your leakage flows with just one measuring device. Due to its design, it is also ideal for mobile measurements.

Visit website

VA 550 Thermal mass flow sensor for flow measurement

Record and reduce your energy costs and increase your sustainability with the VA 550. Monitor your Consumption and analyse your leakage flows with just one measuring device. Due to its design, it is also ideal for Portable Measuring.

Visit website

VA 550

VA 550

VD 500 - Flow sensor for wet compressed air

Reduce your energy costs and increase your efficiency with the VD 500. Suitable directly for measurement after the compressor. Monitor the delivery rate of your compressor and create a FAD analysis.

  • Measurement immediately downstream of the compressor

  • Measurement at high temperatures

Visit website

VX 570 - Vortex sensor for flow measurement

The high-precision all-rounder. Record and reduce your consumption and increase your sustainability with the VX 570. Monitor your consumption of a wide range of media with just one sensor.

  • Suitable for unknown or changing gas compositions and mixed gases

  • Usable for liquids and steam

  • Measures actual volume flow and mass flow

  • Measurement of the standarized volume flow by integrated pressure and temperature measurement

  • Suitable for fast changing temperature and pressure changes as well as large mass flows

  • No moving parts, therefore low maintenance

  • Corrosion resistant - all parts in contact with media made of stainless steel

  • Insensitive to vibrations due to reference vibration measurement

Visit website

LeakCam 600 - all relevant leakages at a glance

The LeakCam 600 precisely detects compressed air leaks and leaks in compressed gases - even in noisy industrial production environments. Equipped with 64 ultrasonic MEMS microphones and the Power Beam Forming algorithm, it visualises multiple leakages simultaneously and enables them to be located quickly from a great distance. This saves you time when searching for leaks, reduces energy costs and increases the efficiency of maintenance.

Visit website

OIL CHECK 500 – Residual oil vapor analyser for compressed air and gases

The OIL CHECK 500 monitors the concentration of oil vapour in compressed air and gases. Continuous data logging enables you to gain a better understanding of your treatment process. Thanks to this high temporal resolution, you can detect changes in good time. At the same time, the high measurement resolution – even in Class 1 – enables targeted analysis of deviations and helps to ensure process quality.

Visit website

Particle counter PC 400 - mobile solution according to ISO 8573

The high-precision, optical particle counter PC 400 measures particles from a size of 0.1 µm and is therefore suitable for monitoring compressed air quality class 1 (ISO 8573). The proper functioning of the filtration elements installed in the compressed air is monitored and any filter breakthroughs are detected immediately.

Visit website

DP 500 - Portable dew point meter with integrated data logger

The DP 500 Dew point meter with integrated Data logger is the ideal Portable Service instrument for Dew point measurement of all compressed air dryers down to -80°Ctd dew point. The 3.5" graphic display with touchscreen makes operation child's play. The graphic display of the coloured measurement curves is unique. Ideal for Measuring the current Dew point and for graphically displaying the dew point curve and the switching behaviour of the dryer over a longer period of time.

Up to 100 million Measured values can be saved with date and measurement location name. Measured values can be transferred to a PC via USB stick. The data can be conveniently analysed using the CS Basic software (linked below). Measurement data and service reports can therefore be created quickly and easily at any time.

Visit website

My German Pavilion

  • Manage your personal profile here and enter your desired business contacts to German companies
  • Keep an eye on the trade fairs, German exhibitors and products that are of interest to you
  • Receive an e-mail notification on relevant upcoming German trade fair presentations
Sign up now